LED Backup Light, LED Emergency Recessed Downlight

Basic Info

Model NO.	LEK02-3NC
Battery Type	Ni-Cd Battery
Emitting Color	Cool White
Material	Aluminum
Certification	CE, RoHS, CB
Warranty	2 Years
IP	20
Transport Package	Color Box
Specification	40mm Cutout hole
Trademark	flolite
Origin	China
HS Code	8504401400
Production Capacity	3000PCS/Day

Product Description

CB Approved 3W LED Emergency light with Ni-Cd batteries 3Hours Backup

Relevant Standard

EN 60598-1	EN 61000-3-2	IEC 60598-1	IEC61000-3-2
EN 60598-2-22	EN 61000-3-3	IEC 60598-2-22	IEC 61000-3-3
EN 61347-1	EN 62471	IEC 61347-1	IEC 62471
EN 61347-2-13	EN 62493	IEC 61347-2-13	IEC 62493
EN 61347-2-7	EN 55015	IEC 61347-2-7	IEC 55015
EN 62778	EN62031	IEC 62778	IEC62031

Product Parameter

Model No.:	LEK02-3NC	Battery:	Ni-Cd, 3.6V 2000mAh
LED Chips:	CREE XT-E	Luminous Flux:	150lm
Power Consumption:	3W	Input Voltage:	AC220-240V~50/60Hz
Charge time:	24Hours	Emergency duration:	3Hours
ta:	0~35ºC	Max. Case Temp.:	70ºC
Protection Class:	II	IP Rating:	IP20
Operation:	Non-maintained	Function:	AUTO test

Dimension

Installation Diagram

Wire preparation:

0.5~1.5mm²

AUTO Test

∷ Commissioning test-

Connection of the mains supply will initiate commissioning where the battery will remain on charge for an uninterrupted 24 hours; An interruption of the mains supply will reset the counter to zero.

After 24hours, the luminaire will be put into a duration test for the rated period, immediately followed by another 24hr charge period.

∷ Function test-

A 5 second functional test is carried out at 1 week interval.

∷ Duration test-

A full rated duration test is carried out at 13 weeks intervals.

System status is indicated by a bi-color LED.

LED indication	Status	Commentary
Permanent green	Everything works correctly
One flashed 4 seconds pause	Battery failure	Battery is not connected
Two flashed 4 seconds pause	Battery failure	Battery short or low battery Voltage
Three flashed 4 seconds pause	Load failure	LED failure
Green and Red off	DC mode	Battery operation (Emergency mode)

Special Notes

∷ This product should be installed by a registered electrician in accordance with local standards and electrical regulations;

∷ Take care to ensure the mains supply is isolated before installation;

∷ The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced;

∷ The whole luminaire should be replaced when they no longer meet their rated duration of operation after the corresponding recharge period.